Hi- Since I have been asked numerous times to post my H27 calibration settings recently I will post them again. They have been posted a few times here before in the past. I apologise to those that asked weeks ago or even days ago for the delay.....

H27 Calibration settings:
____________________

SERVICE MENU:
TO ACCESS TURN THE PROJECTOR ON AND PRESS THE POWER BUTTON UNTIL THE "POWER OFF" MESSAGE APPEARS, THEN SLOWLY PRESS THE LEFT ARROW(STANDING BEHIND THE UNIT LOOKING DOWN) REPEATEDLY UNTIL THE SERVICE MENU APPEARS. THEN USE THE UP AND DOWN ARROWS TO GO TO THE COLOR CALIBRATION MENU AND HIT THE CENTER "ENTER" BUTTON AND THE COLOR SETTINGS MENU WILL APPEAR. YOU MAY NOT BE ABLE TO CHANGE THESE VALUES. WHEN FINISHED SIMPLY SCROLL TO THE BOTTUM OF THE MENU AND EXIT OR PRESS THE POWER BUTTON AGAIN TO EXIT.
____________________________________________________________________________________________________________________________
Service menu color settings:

Color wheel index: 435

Gains-
Red gain: 128
Green gain: 128
Blue gain: 128

PC offsets-
Red: 63
Green: 63
Blue: 63

Video-
Red: 128
Blue: 128
_________________________

Component Calibrations:

These are the settings I have found work best over all for my service settings. I have found that 'normal' and 'game' are the only ones I need so these calibrations are limited to only those.

IMAGE 1-
Display mode: Normal
Brightness: 55
Contrast: 65
Sharpness: 2
Degamma: Game
Color: 50
Tint: 50
IMAGE II-
White peaking: 6
Color temp: 1
Management-
Signal type: Video
Brightmode: On
System-
ImageAI: On
______________________

Second component image mode: (For use with ambient light or extra punch)

IMAGE I
Image mode: Game
Brightness: 75
Contrast: 90
Sharpness: 2
Degamma: Game
Color: 50
Tint: 50
IMAGE II-
White peaking: 5
Color temp: 1
Management-
Signal type:Video
Image shift: 1
Brightmode: On
System-
ImageAI: On

Hey- These were NEMOS and OZZON's from a few months ago.their images looked superb with these so you might want to try them too:
------------------NEMO--------------------------

Service Menu :
Red Gain - 136
Green gain - 137
Blue gain -139

PC red offset -72
PC Green offset - 69
PC Blue offset -70

Video Red - 72
Video Blue - 69
----------------------------OZZON--------------------
Here are my service window color settings:

Red Gain: 127
Green Gain: 127
Blue Gain: 127

PC Red Offset: 63
PC Green Offset: 63
PC Blue Offset: 63

Video Red Offset: 70
Video Blue Offset: 59

Advanced adjustment color values are all at 50.

My brightness is set around 40 and contrast around 85.

No it probably won't I am sorry to say. These are two completely differently calibrated units, so probably not.