skip to: page content | links on this page | site navigation | footer (site information)
 
Not logged in

Big Screen Forums

Business: Presentation Software and Tools Forum

Topic: Running HDMI from DSLR to projector?
 
LoginRegisterRules
Add Reply to Topic
Author
Topic: Running HDMI from DSLR to projector?
miamiphotographer
member
Joined: Oct 8, 2020
Posts: 7
Oct 13, 2020 6:14 AMReply to PostAlert Moderator
How do you run HDMI from DSLR to projector?

I would like to project a wedding ceremony to a projector so guests can see it on a large 10 x 9 screen.

How should I run the signal?

Cable seems to be out of the question because I need to move the camera.

What transmitter should I use which I can attach to the camera?

Thanks!
AV_Integrated
moderator
Joined: Mar 28, 2005
Posts: 12,768
Oct 14, 2020 1:30 PMReply to PostAlert Moderator
I'm not sure I have the best answer on this one. If you are looking for high quality, then you would typically use a professional grade HDMI or SDI transmitter/receiver system. This is what broadcast professionals use with battery operated cameras.

Anything short of that will be a hit in terms of quality.

This is where I would be looking:
https://teradek.com/pages/ace-800

You likely will need to convert from HDMI to SDI for this type of product.

Also, be aware that 10x9 isn't the aspect ratio of any camera that I'm aware of. If shooting in high definition (typical) then you will be shooting 16:9. So, 120" wide by about 68" tall for your image.
AV Integrated - Theater, whole house audio, and technology consultation during the build and installation process in the Washington, DC metropolitan area.
miamiphotographer
member
Joined: Oct 8, 2020
Posts: 7
Oct 19, 2020 1:13 PMReply to PostAlert Moderator
Quote (AV_Integrated on Oct 14, 2020 1:30 PM):
I'm not sure I have the best answer on this one. If you are looking for high quality, then you would typically use a professional grade HDMI or SDI transmitter/receiver system. This is what broadcast professionals use with battery operated cameras.

Anything short of that will be a hit in terms of quality.

This is where I would be looking:
https://teradek.com/pages/ace-800

You likely will need to convert from HDMI to SDI for this type of product.

Also, be aware that 10x9 isn't the aspect ratio of any camera that I'm aware of. If shooting in high definition (typical) then you will be shooting 16:9. So, 120" wide by about 68" tall for your image.


Thanks so much!!!! It is a little pricey but I guess you always pay for quality....
Add Reply to Topic
 

Where to Buy:

Lamps (Bulbs) Projectors Projector Screens Projector Ceiling Mounts Repairs Cables
More ...