Not logged in
Author |
Topic: 16:9 screen and 16:10 projector question
|
member Joined: Jul 3, 2019 Posts: 1 |
Hello,
I have to choose frame and projector, 16:9 fixes very good on my wall, otherwise 16:10 is a little bit higher and not visible from everywhere. So my choice is 16:9 screen. But I want to buy 3LCD projector, here are not many models 16:9 with 3LCD technology.
I have one question: If I have 16:9 screen with fixed frame (black) and a native 16:10 projector, will it shine out of the frame? If it will, is this shine visible and irritating?
Thanks in advance! | moderator Joined: Mar 28, 2005 Posts: 12,480 |
For home use, you should always get a 16:9 screen and a 16:9 projector. While there are a number of 16:10 projectors on the market, most of them are for the commercial market. They will not have the same contrast, noise levels, or overall home theater design as the 16:9 projectors have.
But, if you must use a 16:10 projector and you have a decent screen with good black borders around the edge, the screen should suck up any overspray of light above/below the screen.
I would be concerned if all you have access to is 16:10 projectors as Epson makes quite a few 16:9 models which are readily available throughout the world. AV Integrated - Theater, whole house audio, and technology consultation during the build and installation process in the Washington, DC metropolitan area. |
|
All times are UTC-8.0. Local time is Dec 5, 2019 11:22 AM
Copyright © 2005 – 2019 Big Screen Forums. All Rights Reserved.
|
|
- Sponsors - |  |  |
|
|