Not logged in
Topic: NEC4100 - Problem with new lamps
Joined: Apr 8, 2014
Posts: 1
Reply to PostAlert Moderator
I ordered (2) replacement lamps for our NP4100 projector but when I replaced them the projector would not power on and the red lamp 2 led blinks. I removed the new lamps put the old ones back in and it worked fine. I tried a combination of (1) old and (1) new and as long as I had the old lamp in the lamp2 spot it would work.

Any ideas? We have less than a 100hrs left on each bulb and a big, AV centered Easter production this weekend.