Hello folks, This is my first time posting, though I've been reviewing the projector forums and projectorcentral for quite some time now. I went ahead and purchased a used Epson Powerlite 710c unit <with 3 extra bulbs> from someone. The unit was supposedly in perfect working order, containing a bulb with at least half its life left as well. Well, it arrived yesterday. I took all the contents out of the box and took a quick read through the online manual to make sure I was setting everything up right. Well, it seems the unit is not receiving any power. When plugged in, the power LED on the 710c should light up. This projector does not. I checked continuity of the power cable, it's good, though I tried another one just in case. I tried different outlets as well, despite the fact I knew it wasn't the problem. Given that I don't know too much about projectors yet, I'd like to defer this problem to the knowledgeable community here. Could this be just a fuse issue? Also, keep in mind that the seller claimed it was working before shipping. I'd appreciate any help that can be given! Regards