My take with me projector shut down as it was due for a lamp. Once replaced, unit will not properly power up and I can not reset lamp counter. With main power on, power indicator is red (standby) but all three fans are running and the bottom one kind of cycles high to med speed and back. It acts like it is in cool down. Removing any of the 3 monitored covers has no effect on the problem. Any thoughts? As to the question about theaters and if anyone else has one, the picture is of my last system, a 96" motorized Draper (glass) fed by an Mitsu XL1XU. I am now running a Mitsu XL30U on a 100" motorized Draper Salara in mat. I will put up a picture or two later. Since I'm the FNG today, just thought I should somehow qualify. Thanks, looking forward to sharing, and hopefully some thoughts on my question.