Hi, Im having a similar problem with my 4650... works fine on S-video and Composite input but the VGA ports produce this misalignment.
Seems to be a sync issue with these ports... gonna take a look at the input board when I get some time to dig around
FYI.. If I output in SVGA and then set the projector from AUTO to XGA on the Source menu then the alignment issue goes away (and you get about 20% of the top of the picture replicated at the bottom of the screen - but hey its watchable ;)
Will keep ya posted, hopefully something simple gone on the board!
Hi,
We found a fairly old projector about a week ago (Philips Projector Proscreen 4650 : http://www.projectorcentral.com/Philips-ProScreen_4650.htm
and we plugged it into a nintendo wii and the TV and everything worked perfectly. However then we tried using it with a pc and noticed the colours seemed to be mis-aligned. We switched back to using the projector as a tele and everything was fine again.
Then yesterday we tried using the projector with the pc again and it worked fine for about 3 hours, then the colours started slipping and became misaligned again, so we tried using the projector with the wii and as a TV but the colours stayed mis-aligned.
What could be going on? From reading another post on a similar type problem you guys thought it might have been an LCD panel mis-alignment, however it's rather strange because before it was only misa-aligning every now and then not all the time.
Here is a picture of what it looks like now;
projector colour mis-alignment?
