Not logged in
Posts referring to the InFocus Home IN72
Click the topic name to jump to the matching post
Jump to page: <<<12345>>> (8 total)
Jan 10, 2016 11:41 PM
I have an Infocus IN72 projector with 270hrs on its lamp.
I have been using the projector on a stand for a long time with no problem at all.
Two days ago i bought a ceeling mount and attached my projector.
So the next day i watched a movie with my wife and when the movie finished in vaguely noticed a yellow-ish spot on top of the Screen.
I thought it was on the outside of the lense and cleaned it but no luck. Its something in the inside.
I let the projector cool down and turned it on again.
If i am right i think the spot moved a bit downwards and when looking at it up close it seems like (i will try to explain it) its a bit of dust or something that moves - trembles due to the fan air.
I am not sure what it might be.
IS THERE ANYTHING I CAN DO.????
I will clear the filter (if there is one) for the first time and i was thinking of using copressed canned air with caution to clean all around inside.
I appreciate any help on the matter.
Thank you all in advance.
Dec 10, 2008 7:00 PM
Does anyone know how to update the firmware on a IN72? I have 2.2 and noticed that there is an 3.0 version.
Dec 5, 2008 5:48 PM
I hope someone can help me!!
I just purchase an Infocus IN72 that replaced my Infocus Screenplay 4805. Both unit were very nice but decided to upgrade for HDMI.
My problem that I can't seem to fix with both units is that the picture is lower on the righ hand side. I have adjusted eveything posible to resolve this issue but can't see to find out why. I though since I just purchased the IN72, that is would have resolved this issue, "it didn't". I'm pushing more to the idea that it might be how I install the wall mount. My wall mount isn't homemade.
Any information would be very helpful.
Feb 29, 2008 1:50 PM
I was watching a movie w/ my projector and fell asleep. when i woke up, there was still sound but no picture. i looked to see if there was a light on, but the LED wasn't on at all. No green light or red light. im thinking the capacitor went out. the cord still works cuz when i plug it into the projector it kinda sounds like it sparks inside the plug. i just dont want to have to pay the $400 repair fee. i'm confident that i can resolve this issue with the help from the people here on the forum. thanks
Jan 11, 2008 7:27 PM
I am just wondering if anyone has the repair service manual for Infocus IN72 home theater projectors.
My projector is broken because of a capacitor burned. And I will like to know the capacitance and voltage of the capacitor.
| |Jump to page: <<<12345>>> (8 total)
All times are UTC-8.0. Local time is Feb 25, 2020 6:46 PM
Copyright © 2005 – 2020 Big Screen Forums. All Rights Reserved.