Not logged in
 

Posts referring to the Sanyo PLC-SW30

Click the topic name to jump to the matching post
Topic:   Sanyo PLC-SW30 help

[QUOTE=martin3030|Apr 27, 2005 8:46:31 AM] Wonder if anyone can help here I have been given a Sanyo PLC-SW30 which powers up but no illumination. On switch on the green power light glows for 15 seconds with the fan running slow. A red light then blinks intermittently and the fan runs fast for approx 1 minute before stopping and the red light then stays constant. There are no lights displaying Warning or replace bulb. Are these the symptoms of a blown bulb? Can the bulb be tested with a continuity meter ? If the bulb needs replacing are the above signs consistent with that ? Any information greatly appreciated. [/QUOTE] Definately sounds like a bad bulk. If you're looking to buy a lamp call IAVI at 888-999-6564.
Forum: Projectors
 
Topic:   Sanyo PLC-SW30 help

Wonder if anyone can help here I have been given a Sanyo PLC-SW30 which powers up but no illumination. On switch on the green power light glows for 15 seconds with the fan running slow. A red light then blinks intermittently and the fan runs fast for approx 1 minute before stopping and the red light then stays constant. There are no lights displaying Warning or replace bulb. Are these the symptoms of a blown bulb? Can the bulb be tested with a continuity meter ? If the bulb needs replacing are the above signs consistent with that ? Any information greatly appreciated.
Forum: Projectors