Hello. I own an Infocus Screenplay 5700 and I just purchased a new bulb with the housing. I just tried to install the new lamp and the projector wont start up. It keeps trying to cycle thru the startup process and I can hear the fans trying to kick in, but it just shuts off. During this process a red light blinks 4 times in a row. What does this indicate? If I need a new fan or something where can I find one at? I thank you in advance for any help lended.
Greetings. I own an infocus screenplay 5700. I recently bought a new bulb to replace the old one and while in the process I misplaced the metal arms that connect the bulb to the frame it rests on. The arms are like the metal contact bars that conduct current I believe. On these bars you also connect the plastic collars that almost fit like boxing gloves on these metal arms. I attached this clip so you can see precisely what part I am talking about. The part I need is the one shown being removed between 1:40-1:48 of this link: http://www.youtube.com/watch?v=lVPlh_wC8AE
Does anyone know where I can get this part? It seems like a pretty common part. I reside in the Chicago area )If that helps. I thank you all in advance for any help lended!!
Hi pros!
I need a part for an Infocus Screenplay 5700
Part Needed: (1) Color wheel assembly: the wheel and the motor
I'm comfortable working on this projector (replaced the power supply last year) so I only need the part please. Happily pay what you think it's worth.
I see several posters talking about buying these type of parts but I've searched a lot and do not see references to any sources...?
Any help, much appreciated.
Rodger
Hello,
I also have a InFocus SP5700 which I believe the color wheel or bearings must be replaced. This was done once under warranty but now
it's a couple years out of warranty and looks like it may have to be done again.
It started making the same loud noise as before when turning it on. Today it's only showing the screen in green colors with images sort of flashing (strobe effect). Does anyone know how to make this repair or where I can get parts?
Any help is greatly appreciated.
Regards,
Ron
[QUOTE=sheridan|Oct 8, 2008 10:56:56 PM]
Okay. I know I'm going to regret this, but....I've finally started getting parts for Infocus 4805 and X2 again. X1 parts are not available. The Light Tunnel in the X2 is the same as the X1, if that helps.
I've only ordered enough to satisfy current requests. I am sure there are some that have been left out, I am in the Houston area and lost some time and info thanks to Ike.
So if you're one of those that was looking for parts, let me know. I'll see what I can do. I know someone was after a color wheel for a 5700 and it had been on B/O, but may now be available. I have to check on that.
One caveat, Infocus can always pull the rug at anytime. So I don't ask for any money until I have confirmation that they've been shipped to me.
One more point, I never intended for this to be a point of commerce and the forum rules prohibit this sort of activity. Since there does not seem to be PM function with this forum, let me have your email addresses and we'll take it offline.
[/QUOTE]
Projector has a red light that is blinking 4 times upon startup
