Hello all, I had a quick scan of the FAQs and the pinned yellow thread but it didn't seem to be what i was after. I scored an old Epson EMP 70000 projector from work that they were going to toss and I have set it up and it runs great, except for one little problem. It seems that the Red colour is shifting or running to the left slightly, which ghosts everything on screen. very annoying. I have tested the projector using image from both a VGA and RCA inputs and both have the same problem. Would this be something I should be able to adjust via the menu system? Can I open it up and straighten something out? Any help would be much appriciated. Bonus question: what would the 'sync' buttons be for? I press them and it doesnt seem to do anything. Tracking buttons are positioned as left and right arrows and the sync buttons are positioned as up and down arrows. (these arrows are also used for navigating the menu). Again, any help would be much appriciated.